链式静止同步补偿器控制系统的研究与设计-中国测试.pdf

第41卷第 12期 中国测试 Vol.41 No.12 2015年 12月 CHINA MEASUREMENT TEST December，2015 doi院10.11857/j.issn.1674-5124.2015.12.025 链式静止同步补偿器控制系统的研究与设计 1袁2 2 魏丽君 袁 谢永超 （1.中南大学地球科学与信息物理学院，湖南 长沙 410083；2.湖南铁道职业技术学院，湖南 株洲 412001） 摘 要院该文基于串联多电平技术袁完成一套链式静止同步补偿器控制系统的研究与设计遥根据反馈解耦控制算法和 单级倍频载波相移正弦脉宽调制方法袁采用串联多电平技术袁以TMS320F28335为核心处理器袁采用软件算法实现补 偿器直流侧电压均衡控制遥设计链式结构的三相电压源逆变器袁构成链式静止同步补偿器系统袁实现系统无功补偿控 制遥 经过试验测试袁结果表明院该系统的无功补偿效果与理论一致袁设计可行尧可靠遥 关键词院无功补偿曰反馈解耦控制算法曰串联多电平曰链式静止同步补偿器 文献标志码院A 文章编号院1674-5124渊2015冤12-0100-06 Research and design of control system for cascade static synchronous compensators 1，2 2 WEI Lijun ，XIE Yongchao （1.School of Geosciences and Info-Physics，Central South University，Changsha 410083，China； 2.Hu’nan Railway Professional Technology College，Zhuzhou 412001，China） Abstract: A control system for cascade static synchronous compensators has been developed on the basis of cascaded multilevel technology. In combination with feedback decoupling control algorithm and sinusoidal pulse width modulation for single-level frequency doubling carrier phase shifting， using cascaded multilevel technology，TMS320F28335 as core processor and software algorithm were employed to realize compensator DC-side voltage balancing control. A chain-linked three-phase voltage source inverter was designed accordingly to constitute a cascade static synchronous compensator system，thus achieving the goal of reactive power compensation control. Tests prove that the system is feasible and relia