基于rfid的生产流程实时监控技术研究.docVIP

RESEARCH ON PRODUCTION PROCEDURE REAL-TIME SUPERVISORY CONTROL TECHNIQUE IN RFID-BASED CIRCUMSTANCE 基于RFID的生产流程实时监控技术研究 摘要 In order to realize the supervisory control of production process,RFID-technology is introduced and a RFID-based application solution which is oriented to the process sequence of production manufacturing is proposed.Under this circumstance,borrow-ing the idea of axiomatic design,a mapping from part process field to monitor field is elaborately constructed and it bridges the wide gap between the virtual world and physical world.Combined with the part manufacturing process sequence,a real-time supervisory control model of production procedure logistic flow is designed.This model can be used in RFID middleware to explain and interpret the RFID real-time data so as to provide meaningful and valuable data for decision making. Keywords:Radio frequency identification(RFID);real-time control;supervisory control; production procedure management. 为了实现对生产流程的监控，本文引入了RFID技术，提出了一个面向生产制造流程序列的基于RFID的应用解决方案。在RFID环境下，通过借用公理化设计，构建出一个从零件工艺领域到监控领域的映射。与零件生产流程结合，设计出了一个生产流程的实时监控模型。这个模型可以用在RFID中间件上，解释RFID实时数据，从而为决策提供有意义和有价值的数据。 1.Introduction Radio Frequency Identification(RFID)is a non-contact auto-id technology realized by radio frequency communications.In recent years,more and more literatures have discussed the application of RFID technology.1–6 The rest of this paper is organized as follows:firstly,a conceptual model of production process monitoring and control is proposed in Sec.2.In Sec.3,a relevant physical model is described in depth.In Sec.4,a mapping from part process field to supervisory control field is constructed.The realization of monitoring is analyzed in Sec.5.Finally,this paper is concisely summarized and further research is suggested in Sec.6. 1．引言 RFID是由无线射频通信实现的非接触自动识别技术。近年来越来越多的论文讨论了RFID技术的应用。论文结构如下 ：第二部分提出生产流程监控的概念模型，第三部分描述了一个相关的物理模型，第四部分建构从零件工艺领域到监控领域的映射，第五部分分析监控的实现，第六部分进行总结和对加深研究的建议。 2.Conceptual Model of Production Process Monitoring and Contr