上网解决方案（Internet solution）.docVIP

上网解决方案（Internet solution） Connect the network cable to the routers LAN port, when the computer will appear to get the IP, and once you get it, start running the input CMD enter, run ipconfig/all, here you can see the computers IP Adress (IP address), subnet Mask (child) Network mask) Default Gateway (default gateway), DHCP Server (DHCP server), DNS Server (DNS) Server) the Default Gateway here is the IP address of your router. Open the browser and type this in the address bar IP, enter the routers user name and password, you can enter the router configuration interface, the inside of the WAN port settings changed to Your actual network settings are OK First, the network settings This is because of the need to manually specify IP, gateway, DNS server networking, and the use of proxy server Internet access. Check your computers network settings carefully. Two, DNS server problems When IE cannot browse the web, the first attempt to use the IP address to access, if you have access, then it should be DNS problems, the problem may be caused by DNS for DNS error when networking or DNS server itself, then you can specify the DNS Service Manual (address is the address of the DNS server, you provide the local ISP can also be used in other places can normally use the DNS server address.) In the attributes of the network, (the address of the DNS server control panel - network and dial up connections - local connection - right property - TCP/IP protocol attribute using the following). Different ISP has different DNS addresses. Sometimes its a router or NIC problem that cant be connected to ISPs DNS service. In this case, you can switch the router off for a while, or reset the router. Another possibility is that the local DNS cache is having problems. In order to improve the website access speed, the system will automatically have access and access to the IP address of the site into the local DNS cache, once again visit this site, is no longer directly through the DNS server from