手机维修流程（Mobile maintenance process）.docVIP

手机维修流程（Mobile maintenance process） (1) fault classification; Do not open the mobile phone mobile phone only from the appearance of the fault can be divided into three types: 1, the first one is not working, including can not boot, press the mobile phone connected to the power supply power switch without any reaction. The second is not completely boot, press the mobile phone after the power switch can detect the current, but no boot prompt information such as key: normal lighting, display lighting light, display character information display, a boot self-test through the ringer tone. The third is to boot, but there are some features of fault, such as key, spirit, display is not normal (character error, black, the character is not clear), silent, not telephone etc.. 2., apart from the mobile phone mobile phone to see its failure, but also can be divided into three major types: power supply, charging and power supply failure, software failure and the transceiver channel part of the fault. Are inextricably linked, between the three kinds of failures such as mobile phone software fault affecting the power supply part, transceiver path PLL circuit, transmission power level control, the time synchronization transceiver path, and transceiver path and reference crystal oscillator provides the clock signal for the operation of mobile phone software. 3. according to the nature of the fault is different, can be divided into the following five types: no boot failure, not network fault, not the card does not show the fault, fault and other faults. Two) basic maintenance environment 1. the first thing to do is to have a quiet environment, and dont do repairs in noisy places; 2. in the table with a thick rubber sheet having insulating function; 3. prepare a small drawer there are many elements of the frame, can put the corresponding accessories, and disassemble process parts, prepare a work table, a magnifying glass or microscope, electric iron, multimeter and oscilloscope, voltage