浅析建筑结构基础不均匀沉降的防治对策（Analysis of prevention and cure measures for uneven settlement of building structure foundation）.docVIP

浅析建筑结构基础不均匀沉降的防治对策（Analysis of prevention and cure measures for uneven settlement of building structure foundation） Analysis of prevention and cure measures for uneven settlement of building structure foundation [Abstract] based building structure of uneven settlement is mainly due to the weak foundation soil structure and superstructure load factors such as uneven, resulting in large deformation, the upper structure of the crack, inclined or damage. How to solve the adverse effects of uneven settlement on the superstructure, such as excessive deformation, cracks, tilt and even collapse, is a major problem facing the engineering construction and foundation science. The causes of uneven settlement of building structural foundation and the Countermeasures for prevention and control are discussed. [Keywords] foundation; uneven settlement; prevention and control Uneven settlement of the foundation of the building structure often leads to excessive deformation, cracking, tilting and even destruction of the superstructure. In reality, such examples abound. The famous Italy Leaning Tower of Pisa is due to uneven settlement of superstructure excessive inclined foundation, Suzhou city tiger tower is also due to the uneven settlement of foundation, the North Tower leans heavily, not only from the top center line has reached 2.31M, and the bottom of the tower produces a lot of cracks, become dangerous building and closed a time. 1 causes analysis of uneven settlement of building structure foundation When the foundation foundation produces uneven settlement, most of its manifestations are cracking of the underlying wall, and may continue to extend upward in severe cases. Inclined cracks usually occur at either end of the vertical wall of a building, or in the middle of a building and the positive angle of a building. The cause of the inclined cracks is that the local settlement of the foundation causes the wall to bear greater shear. When the tensile stress exceeds the tensile