二胡的制作过程（The making process of Erhu）.docVIP

二胡的制作过程（The making process of Erhu） On the making process of Erhu The foundation of Erhu production is the manufacture of the shell of Erhu and fiddle. It is very inappropriate to do a good wooden shell. It takes a long time to practice and fully understand the working principle of the erhu. Relying on woodworking machinery to complete, there are certain limitations, so in the erhu production, the producers personal technical level is essential. I after years of study and accumulation, improve the production process requirements of instruments, the theory and practice of the system on the formation of the bow string and plucked in Ledu, in order to maintain the high quality, high requirements of the erhu, I have personally produced high-grade erhu material and wood shell, a solid foundation for the beautiful erhu color and exquisite craft make. We still keep hand crafted traditional ways. In order to let you understand the erhu, understand the erhu, learn how to tune the erhu, especially the erhu production process and production theory to show. Some understanding of the principles of Erhu production, you can adjust your own erhu in use, an erhu can be adjusted through all aspects of different effects, therefore, learning to adjust is also very important. Improving the production of erhu, should first make the components, then assembled. The manufacturing process of each part is as follows: [chin and chin] Choose the material according to the size of machining allowance plus cut blank, the upper plane side (top to bottom shoulder), planing to edges, conical shape with sharp Rasp File on the coarse fine. In the bar top to dig into the square, must be planed, planing is in addition to the available woodworking plane (common name tiger, two planes) can also be used (a special tool of making products with a mahogany), not even better than a plane, inverse stubble. The wooden part ten with wood production, the bottom plane saw saw some 0.7 mm wide, 20 mm deep kerf, in th