刀具及其材料（Cutting tools and their materials）.docVIP

刀具及其材料（Cutting tools and their materials） Cutting tools and their materials (57 questions) spot Turning tool The angle of the tool measured in the cutting plane is (D). A, front angle B, back angle C, wedge angle D, blade edge angle The cutting force can be divided into the main cutting force Fz, the cutting resistance Fy and the feed resistance Fx, in which the force that consumes the maximum power is (C). A, feeding resistance, Fx, B, shear resistance, Fy, C, main cutting force, Fz, D, uncertainty The main cutting edge of the cutter is too wide, and it is easy to produce when cutting (D). A, B, C, bending torsional vibration, mark D In the following tool geometry parameters, the residual area height is not (D). A, the main deflection angle B, the auxiliary deflection angle C, the tool nose arc radius D and the blade inclination angle The angle measured in the cutting plane is (D). A, front angle B, back angle C, main deflection angle D, blade inclination angle In the turning process, the angle between the front face and the base surface is called (C). A, back angle B, main deflection angle C, front angle D and blade inclination angle (C), anterior horn should be bigger. A, brittle material processing, B, high hardness of workpiece material C, processing plastic materials - D, brittle or plastic materials Reduce the main deflection angle (A). A, which improves the tool life, B, and reduces tool life C, to avoid deformation and vibration of the workpiece, D, no impact on the cutting process (B) the main function is to reduce the friction between the rake face and the cutting surface. A, front angle B, back angle C, helix angle D, blade inclination angle Milling cutter In the following cases, the selection of the rake angle of the milling cutter is wrong (a). When A and brittle materials are processed, the cutting force is concentrated at the cutting edge, and large negative rake angles are usually chosen to prevent the collapse of the cutting edge B, cutting plastic