电力软件名（Power software name）.docVIP

电力软件名（Power software name） One, PSAPAC Brief introduction: Developed by EPRI, the United States is a comprehensive software tool for analyzing static and dynamic performance of power systems. Function: DYNRED (Dynamic, Reduction, Program): network simplification and dynamic equivalence of systems, retaining the nodes needed. LOADSYN (Load, Synthesis, Program): simulated static load model and dynamic load model. IPFLOW (Interactive Power Flow Program): the combination of rapid decomposition method and Newton Raphson power flow analysis method, the steady-state analysis tools and the trend of different voltage load, accidents and power dispatch conditions. TLIM (Transfer, Limit, Program): rapid calculation of power flow and transmission limit of power lines with various loads, accidents and power generation scheduling. DIRECT: the direct method of stability analysis software makes up for the time-consuming and time-consuming defects of the traditional time domain simulation, and provides a method to calculate the stability margin, thus enhancing the ability of time domain simulation. LTSP (Long, Term, Stability, Program): LTSP is a time domain simulation program used to simulate the long dynamic processes of large power systems subjected to disturbances. In order to ensure the accuracy of simulation, detailed models and methods are provided. VSTAB (Voltage, Stability, Program): the program is used to evaluate the voltage stability of large complex power systems, giving information and instability mechanisms close to voltage instability. In order to estimate the voltage instability, an augmented power flow program is used to provide a near unstable mode analysis method. ETMSP (Extended, Transient, Midterm, Stability, Program): EPRI is a time domain simulation program for analyzing transient and medium-term stability of large-scale power systems. In order to meet the large-scale power system simulation program, using sparse technology, solving network equation to obtain