一注真题（A test）.docVIP

一注真题（A test） 1. the cost of building an ordinary building is 10 million yuan, so the estimated cost of building materials is about the following price A. 2 million 500 thousand yuan B. 3 million 500 thousand yuan C. 4 million 500 thousand yuan D. 5 million yuan to 6 million yuan 2., there is a widely used metal in the construction industry, which is very rich in nature. It accounts for almost 7.45% of the total weight of the crust and 1/3 of the total metal content in the crust. Which of the following is it? A. iron B. aluminum C. copper D. calcium 3. steel refers to carbon containing less than 2% of the iron carbon alloy, and carbon content greater than 2%, is called: A. wrought iron B. pig iron C. alloy iron D. tinplate 4. according to the international standard (ISO630880) gypsum wallboard recommended width is 600mm, 900mm, 1200mm, the recommended length of gypsum wallboard which group is right? A. ranges from 1500 to 2700mm per 300 increments B. ranges from 2700 to 3600mm per 300 increments C. ranges from 1800 to 3900mm per 100 increments D. ranges from 1800 to 3600mm per 100 increments 5. when ordinary plasterboard is used in kitchen, bathroom and air relative humidity, it is necessary to take corresponding measures to prevent moisture in Daewoos humid environment A. 40% B. 50% C. 60% D. 70% 6.. What kind of building can be built when the 05 unit of dry bulk density (C3) (No. 30) is used as a cross wall load bearing house? A. below six floors, height 17m B. below five floors, height 15m C. below four floors, height 12m D. below three floors, height 10m 7. all the test blocks for concrete compressive strength in a construction site laboratory are all 100mm * 100mm * 100mm. Under the standard curing condition, the compressive strength values are obtained for 28 days. How to determine the strength mark? A. must use redo standard cube size 150mm * 150mm * 150mm B. takes the maximum intensity of all the small blocks C. may be multiplied by the dimension conversi