连梁 框架梁 区别（Difference between beam and frame beam）.docVIP

连梁 框架梁 区别（Difference between beam and frame beam） Answer: the difference and design of coupling beam, frame beam, secondary beam and foundation pull beam These views are all personal views on the Internet, some of which are open to question. My views on the third floor, welcome to peer! Some people on the design of beams, beam and secondary beam and foundation beam (or cap independent column base connections between beams) are constructed and used to scope is not clear, resulting in improper use. This problem is illustrated with a combination of specifications, standards, Atlas and construction manuals. 1, coupling beam and frame beam: Refers to the beam and shear wall are connected with both ends of the beam span ratio is less than 5 (see section 7.1.8 of the specific provisions of the high regulation); frame beam and frame column refers to both ends connected with both ends of the beam, or shear wall connected but not less than 5 higher than the cross beam. Both have in common is: on the one hand from the perspective of the conceptual design, in the earthquake when they want to appear first in frame beam or beam plastic hinges instead of frame column or shear wall, the so-called strong column and weak beam and strong wall and weak beam; on the other hand, from the angle of structure, both must meet the seismic structural requirements, specifically to the longitudinal steel frame beams and beams (including steel beam bottom and top beam) must meet the requirements of seismic anchorage length in the anchor into the mount, corresponding to the same level of seismic frame beams and beam stirrup spacing and diameter of encryption area requirements are the same. The two are not the same, lies in the seismic design, allowing the beam stiffness is greatly reduced, in some cases it can even be allowed to quit the job, but the beam stiffness only allowed to reduce, and not allow it to withdraw from work, so the specification of secondary beam is not resting on the coupling