钛合金（titanium alloy）.docVIP

钛合金（titanium alloy） Titanium alloy can be divided into three categories according to the organization. (adding 1 titanium adding aluminum and tin elements of.2 titanium added aluminum and vanadium elements. Aluminum alloy elements such as chromium molybdenum vanadium titanium.3) titanium alloy has high strength and density, good mechanical properties, toughness and corrosion resistance is very good. In addition: the process performance of titanium alloy is poor, difficult to machining. In thermal processing, very easy to absorb oxygen nitrogen impurities such as carbon. And abrasion resistance is poor, the complexity of the production process. Titanium alloys An alloy consisting of other elements based on titanium. The industrial production of titanium began in 1948. The development of the aviation industry requires the titanium industry to grow at an average annual rate of about 8%. At present, the worlds annual output of titanium alloy processing materials has reached more than 4 tons, nearly 30 brands of titanium alloy. The most widely used titanium alloys are Ti-6Al-4V (TC4), Ti-5Al-2.5Sn (TA7) and industrial pure titanium (TA1, TA2 and TA3). Titanium alloys are mainly used to make aircraft engine compressor parts, followed by rockets, missiles and high-speed aircraft structures. In the mid 60s, titanium and its alloys have been used in general industries to produce electrodes for the electrolytic industry, condensers for power stations, heaters for petroleum refining and desalination, and environmental pollution control devices. Titanium and its alloys have become a kind of corrosion resistant structural materials. In addition, it is also used in the production of hydrogen storage materials and shape memory alloys. China started titanium and titanium alloy research in 1956. In the middle of 60s, titanium alloy was industrialized and manufactured into TB2 alloy. Characteristics: compared with other metal materials, titanium alloy has the following advantages: (1