钢结构（Steel structure）.docVIP

钢结构（Steel structure） First, the basic explanation of common nouns (1) noun interpretation 1, building density: planning plots of various types of building base area and land area ratio. 2, the volume of construction is: reflect and measure the intensity of use of land construction an important index refers to the ratio of total construction land within the building area and land area is: the volume of the total construction area of 83019 = building land area. The total floor area is the sum of all the floor areas on the ground. The smaller the ratio, the smaller the total building capacity, the higher the quality of living. 3, green rate: refers to the planning and construction of land within the area of green space and planning and construction land area ratio. 4, floor spacing: East to West spacing of 1:1, North and South East to 1:1.3, north-south to 1:1.5. 5, building height: Storey refers to the residential height to layer as a unit measurement, each layer of the height of the country in the design of a request, this height is called storey. Specifically, storey height refers to the vertical dimension between the lower floor surface or the upper surface (or lower surface) of the floor to the upper surface (or lower surface) of the adjacent upper floor. Residential building modulus coordination standard (GBI100-87) stipulates that the residential storey adopts the following parameters: 2.6 meters, 2.7 meters, 2.8 meters. Height refers to the net height minus the floor thickness value. 6. Population density: the planned population per hectare of residential land (person /ha). 7. Net population density: the planned population size per hectare of residential land (person /ha). 8, depth: in architecture refers to the actual length of a house or a residential building to the previous layer after the wall. 9, width: that is, the width of the house. The outer side of a house inside to the actual distance between the other side of the wall, (a) because of the width of a