锁线书芯加工艺（The book sewing process）.docVIP

锁线书芯加工艺（The book sewing process） Laminating process I. overview Covering film is a comprehensive technology, it involves many factors, such as plastic film, adhesive, solvent, printing, surface ink layer, mechanical control and environmental conditions, etc.. In order to obtain high quality coated products, it is necessary to control the changes of these factors in the process and coordinate the relationship between them. Film processing technology, summed up, mainly semi-automatic and fully automatic operation of the two categories. Semi automatic operation, in addition to glue, hot pressing, composite parts, such as mechanical operation, paper feeding, slitting, and other parts of the operation are manual operation, labor intensity, production efficiency is not high. Full automatic operation from the beginning of the paper, the coating, composite, slitting, finished products were collected by mechanical completion, time saving and labor saving, high production efficiency, despite these differences, but the process is the same: first, roller coating device of adhesive evenly coated in plastic film, oven (TAO) the solvent evaporated, then, will print the printed traction to the hot pressing device, and then the plastic film and printing press, paper and plastic film products and become a. According to the raw materials and equipment used, the coating process can be divided into coating process and pre coating film process. That is to say, when applying the coating process, the adhesive is coated on the film first, then hot pressed, which is widely used in china. Pre coating process is to pre adhesive coating on plastic film, after drying and winding, in the non adhesive coating device on the laminating equipment for hot pressing, so as to complete the film coating process. The pre coated film process for laminating device does not need adhesive heating and drying system, greatly simplifying the coating process, and the operation is very convenient, can be used with