fanuc 0-td系统说明书（Fanuc 0-td System Manual）.docVIP

fanuc 0-td系统说明书（Fanuc 0-td System Manual） NC programming, FANUC, 0-TD system G code command The function of the code group and its meaning modal code and general code form code will continue to be maintained when it is executed, and general code only works when the command is received. Defining moving code is usually modal code, such as straight lines, arcs, and cyclic code. Conversely, returning code like origin is called general code. Each code belongs to its own code group. In modal code, the current code is replaced by the same set of code that is loaded. G code group explanation G00 01 positioning (quick moving) G01 linear cutting G02 cut the circle clockwise (CW, clockwise) G03 cut the arc counterclockwise (CCW, counterclockwise) G04 00 pause (Dwell) G09 stops at precise position G20 06 imperial input G21 metric input G22 04 internal travel limit is valid G23 internal travel limit is invalid G27 00 check reference point to return G28 reference point returned G29 returns from reference point G30 returns to the second reference point G32 01 cutting thread G40 07 cancels tool nose radius offset G41 tool nose radius offset (left) G42 nose radius offset (right) G50 00 modifies the workpiece coordinates; sets the maximum RPM of the spindle G52 sets the local coordinate system G53 select machine tool coordinate system G70 00 finishing cycle G71 internal and external diameter roughing cycle G72 step roughing cut cycle G73 forming repeat cycle G74, Z stepping drilling G75 X tangential groove G76 thread cutting cycle G80 10 cancels the fixed loop G83 drilling cycle G84 tapping cycle G85 positive bore cycle G87 side drilling cycle G88 side tapping cycle G89 side boring cycle G90 01 (inside and outside diameter) cutting cycle G92 thread cutting cycle G94 (step) cutting cycle G96 12 constant line speed control G97 constant line speed control cancelled G98 05 feed rate per minute G99 feed rate per turn Code interpretation G00 positioning 1. format G00 X_ Z_, this command mo