怎样制作天线 文本文档（How to make an antenna text document）.docVIP

怎样制作天线 文本文档（How to make an antenna text document） Skinned antenna is an easy to draw, easy to make and easy to carry antenna. If you can find a coaxial cable and an antenna plug for your station, we can do it. It is important that coaxial cables can be used in feeders for closed-circuit television and that a better quality is selected. Now the closed-circuit television feeder quality is uneven, there are three key points, one is the shielding network to close; two is the wire to rough, but considering the convenient use, using 75-5 and 75-7 wire can; three is the conductor line must be easy to weld, now many manufacturers in order to save cost, with some cheap but it is not easy to Shangxi welding material to produce feeder, so advance application of electric iron welding test, I can use, not to the time spent energy made up the antenna welding. The antenna plug is dependent on your radio interface. The following is the structure of the antenna: the first step: take a section of coaxial cable, the length of the cable will be antenna, plus the total length of feeder, can be appropriate to stay a little longer. The second step: to measure the position of 1/4 wavelengths from one end of the feeder. The wavelength (meter) is equal to the 300/ frequency (MHz). In theory, it should take about 96% of the shortening parameter, but taking into account the long shelf stay, we should not shorten the parameters. The antenna to do 145MHz, to measure the position for 300/145/4 is about 0.52 meters; to do 29.6MHz is: 300/29.6/4 is about 2.53 meters; the other band length can be calculated by frequency. The third step: in the last step out of the 1/4 wavelength place, the cable skin ring cut, pay attention to dont hurt the cable. The fourth step: pull out the skin. The fifth step: the coaxial cable down release, this is a fine, slowly a little. The sixth step: the network cable is set on the outside of the coaxial cable, so it is called peeling ~ ~ ha ha. The seventh step: the orig