手动书架（Manual bookshelf）.docVIP

手动书架（Manual bookshelf） GB/T 13667.3-2003 NO green This section is about GB/T136 667.3-19 992 revision of manual dense bookshelf technical condition. This section is with GB/T136 Compared to the 667.3-1992, the main changes are as follows: One with GB/T136 667.1, surface treatment clause revision, this part also change along with it: Modify the loading position of the loading stability of the shelf one by one so that it can be executed by the child; - the original standard stipulates that the sampling quantity shall be the pantograph or three stacking units in batches, and the sampling quantity is too large to be put into practice Production status and the operability of the sampling, the number of samples changed to a standard frame This section is proposed by the China Light Industry federation. This part is centralized by the national furniture standardization center. This section is responsible for drafting units: national office equipment quality supervision and inspection center. This part takes part in the drafting unit: Baoshan District Shanghai west book equipment factory, Beijing double air office equipment Co., Ltd., Luoyang thriving books Equipment Co., Ltd., Changzhou Chang Wu archives books and equipment factory, Changzhou Wujin books, equipment and supplies four factory. The main drafters of this part are Yang Yuhua, Yang Tianrun, Kong Lingmin, Cao Haiyun and Zhou Zhongyi. All previous editions of the standard replaced by this part are: GB/T13667.3-19 Nine hundred and ninety-two GB/T 13667.3-2003 Manual crowded bookshelf technical condition Range.. This section of the GB/T13667 sets out the terms and definitions, classifications and nomenclature, materials and structures, requirements, and testing methods for manual and intensive bookshelves Rules of inspection, inspection, marking, packing, transportation and storage. This section applies to manual shelves. 2 normative reference documents The terms and conditions of the following documents shall be th