摩托车怠速不稳分析(Analysis of motorcycle idling instability).docVIP

  • 7
  • 0
  • 约1.25万字
  • 约 11页
  • 2017-10-07 发布于河南
  • 举报

摩托车怠速不稳分析(Analysis of motorcycle idling instability).doc

摩托车怠速不稳分析(Analysis of motorcycle idling instability)

摩托车怠速不稳分析(Analysis of motorcycle idling instability) Motorcycle idling instability analysis 2010-03-03 18:31 The low speed and idle speed of motorcycle engine mainly include three phenomena, such as no idle speed of engine, unstable idle speed of engine and excessive idle speed of engine. 1. no idle speed When the engine starts, the throttle can not turn to let go, or the engine will stall. This phenomenon is called idling. For example: a new continent XDZ50, after the car engine started, the throttle can not completely relax, and relax will stall. Trouble analysis and elimination: the main reason of idle speed is not: The carburetor idle speed adjustment screw to adjust properly. The carburetor idle hole or oil, airway obstruction. The float chamber of the carburetor oil level is too low. The solar term door carburetor Songkuang or crankcase leakage. When the overhaul, start the engine, adjust the carburetor idle adjustment screws, repeated several times are invalid. Do the acceleration test, engine speed, exhaust smoke color normal. Check throttle cable and valve clearance is normal. Unload the idle adjustment screw, then there is idle speed. According to the above inspection situation, we can judge the fault caused by the blockage of the idle oil hole. Clean the idle adjusting screw and blow through the idle oil hole with compressed air or an air pump. Then screw in the idle adjustment screw and screw it to the bottom and then go out of the 1.5 circle. Start the engine, adjust the idle adjustment screw, and keep the engine running at the lowest speed. Restart the engine, release the throttle, turn the engine, the idle engine runs well, and the engine does not stall. Another example: a Chunlan CL125-2 (Chun Lanbao) with a 2000km run, cold car is not idle, idle, the owners repeatedly adjust the carburetor but no effect. Troubleshooting: cold car idle is not idle, generally speaking, is to adjust the valve clearance due to the improper relationship with the carburet

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档