整理】5053设置开启明锐各项功(Finishing 5053] set the Octavia each function).docVIP

  • 0
  • 0
  • 约1.1万字
  • 约 11页
  • 2017-10-07 发布于河南
  • 举报

整理】5053设置开启明锐各项功(Finishing 5053] set the Octavia each function).doc

整理】5053设置开启明锐各项功(Finishing 5053] set the Octavia each function)

整理】5053设置开启明锐各项功(Finishing 5053] set the Octavia each function) Automatic headlamp The 2 pin on the automatic headlamp switch is connected to the J519 controller E14. Two. Rain sensor The rainfall sensor pin 1 (FireWire access circuit connected to the SC13, the insurance has been occupied, suggestions received SC17 on SC13 and SC17 as a control line); rainfall sensor pin 2 ground zero line; rainfall sensor pin 3 connected to the signal control line on J519 F3. Three 、 anti dazzle eyepiece in car The car is 1 foot anti dazzle mirror line access (circuit connected to the SC4, the insurance has been occupied, suggestions received SC5 on SC4 and SC5 as a control line); car anti dazzle mirror 2 feet to the ground zero line, the car anti dazzle mirror 3 feet to signal control wire J519 C12, the control signal line for reversing light control, to automatically shut down after the anti dazzling reverse hanging. Four, open automatic headlight and go home, leave home function 1, open the 09 module; 2, select 07 encoding; 3, the selection of long encoding help, byte will be 0 below 5 (home function) and 6 (photosensitive, rainfall sensor (home), 7 function) tick after save and exit. 4, adjust the time, away from home, enter, 10, in the channel number in the input 01, will be the new value to 10~120 any time after completion of their preservation; then enter the channel number in the input 02, will be the new value to 10~120 any time after save yourself. Five. Turn on the windows automatically in rainy days 1, open the 46 module 2, select 07 encoding 3, change the number of tenth to 02 (the original factory is 04), start counting from the left, each of the 2 digits to one. Six. Adjust the sensitivity of automatic headlamp and sensitivity of wiper 1, open the 09 module; 2, select 07 encoding; 3, select the third item in the component drop-down box, that is, RLS (Rain Light, Sensor). 4, my original car code is 208933, converted to 16 Decimal, get 033025. This string of sixteen h

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档