旋塞阀（Plug valve）.docVIP

旋塞阀（Plug valve） Plug valves are closed or plunger shaped rotary valve, through the rotation of 90 degrees to make the valve plug on the mouth of the channel with the valve on the mouth of the same or separated, to achieve the opening or closing of a valve. Plug valve plug shape can be cylindrical or conical. In the cylindrical valve plug, the channel is generally rectangular; in the tapered valve plug, the channel is trapezoidal. These shapes make the structure of the plug valve lighter, but at the same time a certain loss. Plug valves are most suitable for cutting and turning on the medium and for shunting applications, but in accordance with the applicable nature and sealing surface erosion resistance, sometimes also used for throttling. Catalog brief introduction Working principle purpose Classification and features soft sealing plug valves Oil lubrication hard sealing plug valve Lift plug valve Plug valves of three and four way cocks Classification by structure passageway Advantage Installation notes for maintenance Comparison of plug valves and gate valves Working principle purpose Classification and features soft sealing plug valves Oil lubrication hard sealing plug valve Lift plug valve Plug valves of three and four way cocks Classification by structure passageway Advantage Installation notes for maintenance Plug valve and gate valve expansion, edit this paragraph introduction As the plug seal between the movement with a wipe action, while fully open, you can completely prevent the contact with the flow medium, it is usually also used for suspension with particles of media. Another important feature of the plug valve, it is easy to adapt to multi-channel structure, so that a valve can get two, three, or even four different flow channels. This simplifies the design of the piping system, reduces the amount of valve used, and some connecting fittings needed in the equipment. Edit the work principle of this paragraph A valve with a through hole stopper as the ope