环氧树脂地板特点的基本概要（Basic features of epoxy flooring）.docVIP

环氧树脂地板特点的基本概要（Basic features of epoxy flooring） Basic features of epoxy flooring Epoxy resin floor due to enforce the laws and regulations of the state environmental protection and energy saving, high pressure building reinforced engineering hidden materials, to force the anti-corrosion treatment, national standards for building structural adhesive will soon be introduced, affected by these factors, rubber demand will no solvent, high performance ultra conventional development. In 2009, the high performance epoxy structural adhesive, will continue to lead the high-end market in China adhesive market growth, (represented by Yanji ratio) greatly influence the final performance of waterborne epoxy floor coatings, adding can not only reduce the cost of waterborne epoxy floor coatings, shorten the surface dry time, also can improve the coating the mechanical strength, wear resistance, gloss and hiding power, reduce the volume shrinkage during curing coating, paint and give good storage stability; but adding excess will increase the viscosity of water paint, causing the surface effect of coating leveling variation, construction difficulty, poor film. Another function of the epoxy resin floor dispersing agent is pigmentation, and the particle size and density of various pigments and fillers are different. Requirements with different pigment cohesive force is weak, to show color uniformity, without causing the flooding and floating color. General should polymer, its moderate hydrophilic lipophilic balance values so that it has good compatibility with the two-component system, can control the floating color effectively and can make a very good pigment dispersion stability in the system, so as to improve the storage stability of the product. Water based epoxy self leveling coatings should be selected with defoaming agents, dispersing agents, dispersing agents, rheological modifiers and levelling agents. The compatibility of the waterborne epoxy system should be considered in