ruhe xiangjiao jishu（汝等技术）.docVIP

ruhe xiangjiao jishu（汝等技术） How to become a good rubber technologist? As a rubber science and technology workers, I would like to upgrade their technical level to a certain height. The most difficult and highly recommended process for rubber technology is formula design. In fact, a factory cannot always design a new formula. Constantly optimizing the recipe, improving the process, and solving the process problems are the most important responsibilities of the technologist. Only when you become a good formula designer, its not too much of a problem to solve some other process problems. Because a good teacher should not only possess the formulation of rich theoretical knowledge and extensive practical experience, and also on the process / equipment / operation / temperature control mold structure and raw material performance identification has a certain understanding, you can have a certain maturity. Even with these conditions, may not be able to become a good formula designer. Also have a good working / learning environment and broaden your mind. Rubber industry can be said to be broad and profound, the technology has specialized, only a certain product can bring up a good engineer, even if you are a senior professor, this industry may not take all. A professional bachelor / Master / doctor with a wealth of theoretical knowledge, a solid theoretical foundation and a good working thinking space in this field. But sometimes in many ways may not be able to correctly deepen the understanding, just like Kong Meng doctrine, our ancestors studied for more than 2000 years, is still in the study. A large number of theoretical knowledge is full of flexibility, and must undergo certain experiments and batch stability after putting into production, and then be able to understand profoundly. Some knowledge is not understood in class, and must be constantly learned and deeply understood in order to improve the process and solve the process problems. This is what people call rubber