不锈钢材质（Stainless steel material）.docVIP

不锈钢材质（Stainless steel material） There are several kinds of stainless steel, as long as the material. Pdzmht 10 has been browsed 8788 times 2013.09.03 304.321. and so on,,,,,, Wzfheibao Adoption rate: 54%, 10, 2013.09.03 accusation Stainless steel material has the following kinds: Model 301- has good ductility and is used for molding products. It can also be hardened rapidly by mechanical processing. Good weldability. The abrasion resistance and fatigue strength are better than 304 stainless steel. Model 302- 304 with corrosion resistance, due to the relatively high carbon intensity. Model 303- makes it easier to cut than 304 by adding a small amount of sulfur and phosphorus. Model 304- universal model, i.e. 18/8 stainless steel. GB is 0Cr18Ni9. Model 309- has better temperature resistance than 304. Model 316-, following 304, has second of the most widely used steel grades, mainly used in the food industry and surgical equipment, adding molybdenum to obtain a corrosion resistant special structure. Because of its better resistance to chloride corrosion than 304, it is also used as ship steel. SS316 is usually used in nuclear fuel recovery devices. Grade 18/10 stainless steel usually meets this application level. [1] Model 321-, in addition to the addition of titanium, reduces the risk of weld corrosion of the material, and the performance is similar to that of 304. 400 series - Ferritic and martensitic stainless steels Model 408-, good heat resistance, weak corrosion resistance, 11% Cr, 8% Ni. The cheapest model () of the model 409-, usually used as an automobile exhaust pipe, and is made of ferritic stainless steel (Ge Gang). 410- type martensite (high strength steel), good wear resistance, corrosion resistance is poor. Model 416- added sulfur improved the machinability of the material. 420- type cutting class martensitic steel, similar to Brandts first high chromium stainless steel this. Also used in surgical knives, which can be made very bright. Model 430- ferriti