加气块（Air entraining block）.docVIP

加气块（Air entraining block） Aerated concrete products can be manufactured according to the raw material categories, quality, equipment, process characteristics, and so on. In general, the fly ash or silica sand, slag water into paste, add appropriate amount of lime, cement, gypsum powder and foaming agent, foam stabilizing agent by mixing injection mold in the box, some foam after curing, cutting into blocks or plates of various specifications, deliver to the steam pressure in the reactor, the high temperature and pressure steam the formation of porous lightweight concrete curing products. It has the advantages of light weight, good thermal insulation, sound absorption, strong strength and processability. It is widely used in building as the filling and thermal insulation material of enclosure structure. Its energy saving, environmental protection and green construction have won the support and favor of the government and people from all walks of life. It has good social and economic benefits and broad market prospects. Popularization and application of aerated building block -- China building energy conservation engineering network I. what is aerated block? Answer: can be aerated block floating on the surface of a stone, someone called pumice! The middle of the hole, which is lighter - also known as the bricks, lightweight wall materials; also makes this material can stop the sound - also known as sound insulation and sound insulation brick brick; because the material contains a large number of air - also known as aerated brick, aerated block; at the same time, this material has good insulation properties, and called energy-saving insulation bricks, bricks; the most important is that it is made of concrete, with high strength, so it was called - autoclaved aerated concrete block (national standard). Two. Principle of aerated block production? Answer: the principle is: the main production of aerated block fly ash and quantitative about 70% of cement, lime, gypsum powd