卧式加工中心换刀机械手（Tool changing manipulator for horizontal machining center）.docVIP

卧式加工中心换刀机械手（Tool changing manipulator for horizontal machining center） As an important part of machining center tool change device, its main function is to reduce the non cutting time, in the process of improving productivity, reduce production costs, and improve the machine and the whole production line productivity in the topic is the design of power FM radio transmitter I havent written this paper before A format is also OK, it is best to have model essay as an example Hope to write the elder sister learning to point point My younger brother is here to thank you first Opening report I. design topics Manipulator lifting mechanism of horizontal machining center Two, the purpose and significance of the subject research In the mechanical industry, the use of manipulators can be summarized as follows: 1) to improve the degree of automation in the production process The application of manipulator will help to realize the automation of material delivery, workpiece handling, tool replacement and machine assembly, thus increasing labor productivity and reducing production costs 2) to improve working conditions and avoid personal accidents In high temperature, high pressure and low temperature, low pressure, dust, noise, odor, radioactive or other toxic pollution and narrow working space in situations with manual operation is dangerous or impossible, and the application of mechanical hand can be replace some or all of the safety work, the labor condition can be improved In some simple, repetitive, especially heavy operation, to carry out the work machine handreplacing the person can avoid fatigue caused by operation or neglect of personal accident 3) can reduce manpower, and facilitate rhythmic production Application of mechanical hand to replace the work, this is a direct side reduction in manpower at the same time, due to the application of mechanical hand can operate continuously, which is reduced to the other side of human and automatic line processing in automatic mac