台式机故障案例（Desktop fault case）.docVIP

台式机故障案例（Desktop fault case） Desktop fault case,.Txt- two people at the same time made a mistake, stand out of the party called tolerance, the other side owed the debt, sooner or later have to return. - do not love is not love, dont fucking say we. Case 1: Description of the problem: Twin Star 6C/766 machine, the motherboard is the elite P6SEP-ME V2.2D, when memory is not inserted in the DIMM1, the boot does not show, but the machine does not alarm. Solution: after testing, when the DIMM1 does not plug memory, even if DIMM2 and DIMM3 are inserted into memory, the boot is not obvious. When DIMM1 plug in memory, regardless of whether DIMM2 or DIMM3 is plugged in memory, the boot is normal. Check weekly as early that this problem is due to this type of integrated graphics memory is shared use of physical memory, physical memory and memory is required to get from the plug in DIMM1 memory, when DIMM1 is not inserted memory, integrated graphics memory cannot be obtained from physical memory, so when the user boot no significant. Case two: Problem Description: every time the computer starts the self-test, the system always stops running at the point where the 512K Cache is displayed. What is the reason? Solution: first, since there is a crash at the display cache, there must be a problem somewhere or later. Remember, usually boot, this item is displayed after the turn of the hard disk to start the operating system. Therefore, you can conclude that the problem is not the cache, that is, the hard disk fault. Remove the hard disk and install it on another computer to verify the hard drive is good. This is the most common way to check for computer failures -- replacement and elimination. Now lets focus on the cache, go to the CMOS settings, forbid L2 Cache, save, quit, restart the machine, and the computer will work properly, and it can be concluded that it is the L2 Cache problem. Touching the cache chip on the motherboard and finding some chips hot, the estimate is the proble