塑料模具设计流程（Plastic mold design flow）.docVIP

塑料模具设计流程（Plastic mold design flow） I. accepting the assignment The task book for forming plastic parts is usually proposed by the designers of the parts: The formal system after signing the product drawings, and indicate the use of plastic trademark, transparency. The plastic product specifications and technical requirements. The production yield. The plastic sample. Usually, the die design task book is made up of the plastic parts and technicians according to the task book of the molding plastic parts. The mould designer designs the mold on the basis of the plastic plastic parts task book and the die design task book. Two collect, analyze and digest the original data Collect and design the parts design, forming process, forming equipment, machining and special processing materials for the design of moulds. The digestion of plastic parts, understand the parts of the purpose, process analysis of plastic parts of the size, accuracy and other technical requirements. For example, plastic products in appearance, color and transparency, the use of performance requirements is what, the plastic parts of the geometric structure, slope, etc. the insert is reasonable, weld line, allowing the degree of shrinkage hole forming defects, without coating, electroplating, adhesive and drilling after processing. Select the highest dimensional accuracy of plastic parts for analysis to see if the molding tolerances are lower than the tolerances for the plastic parts. In addition, we should also understand the plasticizing and molding process parameters of plastics. The digestion process data analysis, molding method, process task book made by equipment type, material specifications, die structure types can implement requirements are appropriate. The forming material should meet the requirements of the strength of the plastic parts, with good flowability, uniformity and isotropy, and thermal stability. According to the use of plastic parts, forming materials should meet the requirements