塑钢门窗设备（Plastic steel door and window equipment）.docVIP

塑钢门窗设备（Plastic steel door and window equipment） [main equipment manufacturer - Jinan Lida Plastic doors and windows machine Co. Ltd.] steel doors and windows welding machine 22000 yuan / Taiwan * 4500 SHZ4-120 four welding machine 1. Jinan Lida Plastic doors and windows equipment four welding machine applicable scope Four position welding machine for plastic door and window (hereinafter referred to as four position welding) is a special equipment for welding and processing plastic doors and windows. It has two left head (No. 1, No. 3), two (right head 2, No. 4), and viewpoint of energy and welding material: chrysene, chrysene::: ,: , + and:: + + the shape of the doors and windows, welding can also be carried out at any angle. It is an ideal equipment for processing plastic doors and windows. 2. Jinan Lida four welding machine technical parameters Power supply: AC220V 50Hz Air pressure: 0.4 ~ 0.6Mpa Gas consumption: 200L/min Power: 4.5Kw Height of welding section: 20 ~ 120mm Width of welding section: Max120mm Welding range: 400 ~ 4500mm Size: 5500 * 1000 * 1700 (mm) Machine weight: 2000Kg * maximum weld size: 90 mm * weldable angle range: 30 degrees ~180 degrees The above parameters are the main parameters when welding arbitrary angles 3. Jinan Lida four welding machine main structure and characteristics 3.1 features This machine is advanced in technology, reliable in performance and simple in operation. All the movements are pneumatic transmission, and the motion pair adopts CM oilless lubrication bearing and linear motion ball bearing. It is of high precision and easy to maintain. The control part adopts imported PC machine (programmable controller), so that the reliability of the whole machine is greatly improved. This machine has the function of any angle. It can weld any angle of single point. 3.2 main structure Four position welding is made up of 1#, 2, 3, 4, four handpiece, frame, electric control cabinet, support frame and so on. Each machine head is provide