砂浆试块（Mortar block）.docVIP

砂浆试块（Mortar block） One, M5: 1, each m3 mortar containing 325# cement 236Kg, medium (coarse) sand 1.11m3; 2, each m3 mortar containing 425# cement 211Kg, medium (coarse) sand 1.13m3; Two, M7.5: 1, each m3 mortar containing 325# cement 292Kg, medium (coarse) sand 1.09m3; 2, each m3 mortar containing 425# cement 261Kg, medium (coarse) sand 1.11m3; Three, M10: 1, each m3 mortar containing 325# cement 342Kg, medium (coarse) sand 1.07m3; 2, each m3 mortar containing 425# cement 305Kg, medium (coarse) sand 1.10m3 Cement mortar mixture ratio M5.0 M 7.5 M10 M 15 M20 Number, quantity, quantity, quantity, quantity of material 32.5 cement tons 0.216, 0.246, 0.271, 0.330, 0.390 Cubic meter of sand 1.015, 1.015, 1.015, 1.015, 1.015 Water cube, meters 0.290, 0.290, 0.290, 0.290, 0.290 .100 cement mortar, that is, its strength is 100kg/cm2, but now all changed to MPa as a unit, and No. 100 corresponds to M10. M7.5 refers to a mortar made of mortar, a cube made of 7.07mm3 specimens, and a compressive strength of 7.5Mpa 2. strength grade: the strength grade of concrete is divided according to the standard value of compressive strength of cube specimens. The cube compressive strength standard value refers to the standard method of production, maintenance of the length of 150 mm cube specimens, 28 d age standard test method for measuring a value distribution of the compressive strength, strength is lower than the percentage of the value of not more than 5%, which guarantee rate 95%. The strength grade of concrete using concrete (concrete) and named the C cube compressive strength standard values of several MPa said, such as the cube compressive strength standard value of 50 MPa concrete, its strength is indicated by C50. When nonstandard specimens are used, the strength of standard specimens shall be converted. The conversion factors are 200 cubic meters of length, 1.05 specimens, and Cube Specimens with a length of 100 mm, 0.95. The standard of concrete strength inspection and assessm