关于断电延时和EEPROM数据保存STC掉电保存数据程序.docVIP

关于断电延时和EEPROM数据保存(申酷！！)  HYPERLINK /tag-EEPROM.html \t _blank EEPROM,  HYPERLINK /tag-%E7%94%B3%E9%85%B7.html \t _blank 申酷,  HYPERLINK /tag-%E6%95%B0%E6%8D%AE.html \t _blank 数据,  HYPERLINK /tag-%E5%BB%B6%E6%97%B6.html \t _blank 延时,  HYPERLINK /tag-%E6%96%AD%E7%94%B5.html \t _blank 断电 原来想用AD检测断电的，做出来测试几遍不行，听了各位的意见。就花了一个下午完成用一个I/O断电检测电路。把法拉电容改小了，节约开支，一个2200uf的普通电容就足够了。经测试能正常保存数据到EEPROM。电路见下面的图片链接。该解决方案的程序：#include?stc12c2052ad.H#include?intrins.h???//汇编头文件#define?uchar?unsigned?char?#define?uint?unsigned?int?sbit?p12?=?P1^2;uchar?i;void?delay(uint?z)?????//延时ms{????uint?x,y;????for(x=112;x0;x--)????????for(y=z;y0;y--);}void?init_232(void)?????//串口初始化{????SCON?=?0x50;????TMOD?|=?0x20;????TH1?=?0xfa;?????????//波特率?9600????TL1?=?0xfa;????PCON?|=?0x80;????EA?=?1;????ES?=?1;????TR1?=?1;}void?send_char(uchar?w)???????//串口发送一个字符{????SBUF?=?w;????while(TI?==?0);????TI?=?0;}void?send_string(uchar?*s,uint?string_length)??//串口发送一个字符串{????uint?i?=?0;????do????????{????????send_char(*(s?+?i));????????i++;?????????????}????while(i??string_length);}/*EEPROM字符读取*/uchar?eeprom_read(uchar?x,y){????ISP_ADDRH?=?x;????ISP_ADDRL?=?y;????ISP_CONTR?=?0x9b;????ISP_CMD?=?0x01;????ISP_TRIG?=?0x46;????ISP_TRIG?=?0xb9;????_nop_();????ISP_CONTR=0;?????ISP_CMD=0;?????????ISP_TRIG=0;????????return(ISP_DATA);}/*EEPROM字符写入*/void?eeprom_write(uchar?x,y,z){????ISP_DATA?=?z;????ISP_ADDRH?=?x;????ISP_ADDRL?=?y;????ISP_CONTR?=?0x9b;????ISP_CMD?=?0x02;????ISP_TRIG?=?0x46;????ISP_TRIG?=?0xb9;????_nop_();????ISP_CONTR=0;?????ISP_CMD=0;?????????ISP_TRIG=0;????}/*EEPROM扇区擦除*/void?eeprom_erase(uchar?x,y){????ISP_ADDRH?=?x;????ISP_ADDRL?=?y;????ISP_CONTR?=?0x9b;????ISP_CMD?=?0x03;????ISP_TRIG?=?0x46;????ISP_TRIG?=?0xb9;????_nop_();????ISP_CONTR=0;?????ISP_CMD=0;?????????ISP_TRIG=0;????}void?main(){????init_232();????i?=?0；????delay(10);????while(1)????{????????if((p12?==?0)??(i?==?0))????????{