热机制程于齿轮精锻之最佳化研究-科技部工程科技推展中心.pdfVIP

行 輪精 精 類 行 年年 行 立 參理林倫 理 論 理 年 行 度 輪精 類 NSC96 行年年 參林倫 類精 陸 論 理 列 列立 利 年年 行 立 年 輪精 輪 零類輪 省 料率輪 來 來行輪 理參數行 行輪 精 粒輪 行理 輪 參數輪 率粒 立 度輪理行 理 粒 Abstract Being an important part of mechanical transmission, gear has been extensively applied in various machines. Gear produced by forging possesses the advantages of material reduction, low cost, higher efficiency, and better mechanical properties. In this study, the geometric model and finite element simulation technique are combined to analyze the thermo-mechanical process and heat treatment of spur gears. Firstly, the grain-refinement effect in microstructure during hot precision forging of spur gears is discussed. Then the heat treatment parameters of spur gears which is carburized and quenched after forging are analyzed and compared. The results show that grain-refinement is obviously influenced by forging velocity, and the dynamic recrystallization distribution is in direct proportion to strain distribution, but in inverse proportion to static recrystallization distribution. The numerical modeling developed to calculate the carburized layer and to analyze the phase transformation, can be us