分析AT89C51的介绍外文翻译.doc

　　分析AT89C51的介绍外文翻译 分析AT89C51的介绍外文翻译 导读：AT89C51的介绍外文翻译tionalnonvolatilememoryprogrammer.Bybiningaversatile8-bitCPUonolithicchip,theAtmelAT89C51isapoicroputeranyembeddedcontrolapplications.FunctioncharacteristicTheAT89C51providesthefollo The Introduction of AT89C51 Description The AT89C51 is a loance CMOS 8-bit microputer mable and erasable read only memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is patible memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By bining a versatile 8-bit CPU onolithic chip, the Atmel AT89C51 is a poicroputer any embedded control applications. Function characteristic The AT89C51 provides the folloer/counters, a five vector todes. The Idle Mode stops the CPU er/counters, serial port and interrupt system 3 4 5 6 7 8 9 10 分析AT89C51的介绍外文翻译 导读：AT89C51的介绍外文翻译rogramverification.Externalpullupsarerequiredduringprogramverification.Port1Port1isan8-bitbi-directionalI/Oportpedance inputs.Port 0 may also be configured to be the multiplexed lo and data memory. In this mode P0 has internal pullups.Port 0 also receives the code bytes during Flash programming, and outputs the code bytes during program verification. External pullups are required during program verification. Port 1 Port 1 is an 8-bit bi-directional I/O port ming and verificat 3 4 5 6 7 8 9 10 分析AT89C51的介绍外文翻译 导读：AT89C51的介绍外文翻译t2emitsthecontentsoftheP2SpecialFunctionRegister.Port2alsoreceivesthehigh-orderaddressbitsandsomecontrolsignalsduringFlashprogrammingandverification.Port3Port3isan8-bitbi-directionalI/Oportits the high-order address byte during fetches from external program memory and during accesses to external data memory that use 16-bit addresses. In this application, it uses strong internal pullupsitting 1s. During accesses to external data memory that use 8-bit addresses, Port 2 emits the contents of the P2 Special Function Register. Port 2 also receives the high-order address