光电系毕业论文外文翻译半导体激光器(适用于毕业论文外文翻译+.docVIP

毕 业 设 计（论 文） 英文翻译 姓　　　　名　　　　　　　　　　　　　　　　　　　　　　 学　　　　号　　　　　　　　０８１１１２２１２１　　　　　　　　　 所在学院　　　　　　　　　理　学　院　　　　　　　　　　 专业班级　　　　　　２００８ 级光信 １ 班　　　　　　 指导教师　　　　　　　　　　　　　　　　　　　　　　 日　　　　期 　　　　　２０１２ 年 ４ 月 ２０　日　　　　　 　 英文原文1.5 Experimental Setup Due to the many concepts and variations involved in performing the experimentsin this project and also because of their introductory nature Project 1 will very likelybe the most time consuming project in this kit. This project may require as much as 9hours to complete. We recommend that you perform the experiments in two or morelaboratory sessions. For example power and astigmatic distance characteristics maybe examined in the first session and the last two experiments frequency andamplitude characteristics may be performed in the second session. A Note of Caution All of the above comments refer to single-mode operation of the laser which is avery fragile device with respect to reflections and operating point. One must ensurethat before performing measurements the laser is indeed operating single-mode.This can be realized if a single broad fringe pattern is obtained or equivalently a goodsinusoidal output is obtained from the Michelson interferometer as the path imbalanceis scanned. If this is not the case the laser is probably operating multimode and itscurrent should be adjusted. If single-mode operation cannot be achieved by adjustingthe current then reflections may be driving the laser multimode in which case thesetup should be adjusted to minimize reflections. If still not operating single-modethe laser diode may have been damaged and may need to be replaced. Warning The lasers provided in this project kit emit invisible radiation that can damagethe human eye. It is essential that you avoid direct eye exposure to the laser beam.We recommend the use of protective eyewear designed for use at the laser wavelengthof 780 nm. Read the Safety sections in the Laser Diode Driver Operating Manual and in thelaser diode section of Component Handling