基于ProE二次开发的端盖参数化模型的实现9.docVIP

基于Pro/E二次开发的参数化模型的实现摘 要CAD技术在机械设计中发挥着越来越突出的作用。而三维实体模型比二维图形能更直观、更全面地反映设计意图，并且在三维模型的基础上可以进行零件装配、干涉检查、有限元分析、运动分析等高级的计算机辅设计工作，因此目前机械设计中广泛采用三维设计。而目前我国Pro/E应用日益普及,而二次开发严重滞后论文介绍了其二次开发工具Pro/TOOLKIT以为例,Pro／Toolkit进行菜单开发、对话框开发,即UI对话框以及如何在VC＋＋环境下编制C语言程序以激活、调用对话框界面设计出更加友好透明的用户界面,方便快捷地实现参数化设计和修改,准确再生出新的实体模型Pro/TOOLKIT、二次开发The Realization of Cover Parametric Parts Based on the Redevelopment of Pro/E Abstract：CAD technology is made more and more use in mechanical design．Design idea can be expressed more visualized and more comprehensive in three-dimensional full-scale mock-up than in two-dimensional drawing ,and based on three dimensional full—scale mock up，many other advanced CAD such as component assembly，interference check，finite element analysis，motion analysis and so on can be proceed．Hence，three—dimensional design is widely used in mechanical design ．However，t the present the application development severely lags behind the increasing popularization of the Pro/E application in our country .So, it is very necessary to develop the Pro/E application. This paper introduces the customization tool Pro/TOOLKIT, and taking cover flange for example, This article provides an example to introduce the technique how to design UI Dialog Boxes By way of Pro/E＇s secondary development tool Pro/TOOLKIT as well as compile c programs to activate and pick up UI dialog boxes in Visual C++. Taking Pro/Toolkit as development tool, a friendly design interface of Cover is established. This paper investigates the method of establishing parametric 3 D model and programming based on 3D model in Pro/E,auto-modeling of 3D parts is realized using Pro/Toolkit. Keywords：Pro／ENGINEER、Visual C++、Pro/TOOLKIT 、secondary development 第一章 绪 论 1.1 三维CAD技术 设计和生产的方法随着计算机的迅速发展每天都在发生着显著的变化。以前许多只能靠手工完成的作业，逐渐通过计算机实现了高效化和高精度化。这种利用计算机来达到高效化、高精度化，实现自动化设计、生产以及解析计算的方法称为CAD(Computer Aided Design，计算机辅助设计)。CAD是指利用计算机的硬件和软件进行的设计活动，它从根本上改变了过去的手工绘图、发图、凭图纸组织整个生产过程的技术管理方式，使之变为以统一的产品数据库为核心的交互式产品设计、分析、制造和维护的过程。它的迅速发展和广泛应用，给工程设计制造业带来了蓬