量检具培训与教材.pptVIP

2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 2008-8-20 * Jacobs Suzhou Vehicle Systems Co., Ltd. 量 、 检 具 培 训 ———— 质量部 Jacobs Suzhou Vehicle Systems Co., Ltd. 钢直尺用于测量零件的长度尺寸，它的测量结果不太准确。这是由于钢直尺的刻线间距为1mm，而刻线本身的宽度就有0.1～0.2mm，所以测量时读数误差比较大，只能读出毫米数，即它的最小读数值为1mm，比1mm小的数值，只能估计而得。 Jacobs Suzhou Vehicle Systems C