Accurate Modeling of the Spiral Bevel and Hypoid Gear with a New Tooth Profile-螺旋锥齿轮的精确建模和齿形的新齿形.pdfVIP

Computer Aided Drafting, Design and Manufacturing CADDM Volume 24, Number 3, September 2014, Page 32 Accurate Modeling of the Spiral Bevel and Hypoid Gear with a New Tooth Profile LI Yun-song, ADAYI Xieeryazidan ,DING Han School of Mechanical Engineering, Xinjiang University, Urumqi 830046, China. Abstract: Distinguishing with traditional tooth profile of spiral bevel and hypoid gear, it proposed a new tooth profile namely the spherical involute. Firstly, a new theory of forming the spherical involute tooth profile was proposed. Then, this theory was applied to complete parametric derivation of each part of its tooth profile. For enhancing the precision, the SWEEP method used for formation of each part of tooth surface and G1 stitching schema for obtaining a unified tooth surface are put forward and made the application in the accurate modeling. Lastly, owing to the higher accuracy of tooth surface of outputted model, it gave some optimization approaches. Given numerical example about the model can show that this designed gear with spherical involute tooth profile can achieve fast and accurate parametric modeling and provide a foundation for tooth contact analysis (TCA) in digitized design and manufacture. Key words: spiral bevel and hypoid gear; formation theory; spherical involute; tooth profile; modeling in modern mainstream manufacturing all should be 1 Introduction used to reduce this error. The spiral bevel and hypoid gear is irreplaceable Moreover, in the actual transmission of spiral bevel transmiss