An Effective Surface Modeling Method for Car Styling from a Side-View Image-一种从侧视图图像进行汽车造型的有效表面建模方法.pdfVIP

Computer Aided Drafting, Design and Manufacturing CADDM Volume 24, Number 4, December 2014, Page 49 An Effective Surface Modeling Method for Car Styling from a Side-View Image LI Bao-jun, Z HANG Xue -fang, L V Zhang-quan, QI Yi-chao School of Automotive Engineering, Dalian University of Technology, Dalian 116024, China. Abstract: We introduce an almost-automatic technique for generating 3D car styling surface models based on a single side-view image. Our approach combines the prior knowledge of car styling and deformable curve network model to obtain an automatic modeling process. Firstly, we define the consistent parameterized curve template for 2D and 3D case respectively by analyzing the characteristic lines for car styling. Then, a semi-automatic extraction from a side-view car image is adopted. Thirdly, statistic morphable model of 3D curve network is used to get the initial solution with sparse point constraints. With only a few post-processing operations, the optimized curve network models for creating surfaces are obtained. Finally, the styling surfaces are automatically generated using template-based parametric surface modeling method. More than 50 3D curve network models are constructed as the morphable database. We show that this intelligent modeling tool simplifies the exhausted modeling task, and also demonstrate meaningful results of our approach. Key words: surface modeling; curve network; car styling; statistic morphable model designer. According to our tests, a trained NX user 1 Introduction takes about 10~ 15 hours t