电子信息与工程专业毕业论文中英文资料外文翻译文献 89C51单片机和DS18B20数字温度计.doc

毕业设计(论文) 中英文对照资料外文翻译文献 (此文档为word格式，下载后您可任意编辑修改！) 要 求 1、外文翻译是毕业设计（论文）的主要内容之一，必须学生独立完成。 2、外文翻译译文内容应与学生的专业或毕业设计（论文）内容相关，不得少于XXXX印刷符号。 3.外文翻译译文用A4纸打印,需包含中文翻译和英文原文。 4、年月日等的填写，用阿拉伯数字书写，要符合《关于出版物上数字用法的试行规定》2017年5月26日”。 5、所有签名必须手写，不得打印。 附件：外文原文 The Description of AT89S51 1 General Description The AT89S51 is a low-power, high-performance CMOS 8-bit microcontroller with 4K bytes of In-System Programmable Flash memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with In-System Programmable Flash on a monolithic chip, the Atmel AT89S51 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications. The AT89S51 provides the following standard features: 4K bytes of Flash, 128 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers, two 16-bit timer/counters, a five-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. In addition, the AT89S51 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power-down mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next external interrupt or hardware reset. 2 Ports Port 0 is an 8-bit open drain bi-directional I/O port. As an output port, each pin can sink eight TTL inputs. When 1s are written to port 0 pins, the pins can be used as high-impedance inputs. Port 0 can also be configured to be the multiplexed low-order address/data bus during accesses to external program and data memory. In thi