橡胶产品信息.docVIP

1 Model: TMTD(TT) Type: Thiurams ? Product information: ?????Chemical Name:Tetramethyl thiuram disulfideMolecular Formula:C6H12N2S4Structural Formula:Molecular Weight:240.41CAS NO:137-26-8Specification: Item Powder Oiled powder Granule Appearance (visual inspection) White or light gray powder(granule) Initial M.P. C= 142.0 142.0 142.0 heating loss %= 0.40 0.40 0.40 Ash%= 0.30 0.30 0.30 Residues on sieve(150micron), % = 0.10 0.10 \ Residues on sieve(63micron), % = 0.50 0.50 \ Additive, % \ 1.0-2.0 \ Granule diameter, mm \ \ 1.5-2.5 Properties:White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster Application:Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of chloroprene rubber.Packing:25kg plastic woven bag, paper with plastic film bag, kraft paper bagStorage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years Welcome to Mintop Group, If anything others, Just contact us. 2 Model: TETD Type: Thiurams ? Product information: ?????Chemical Name:Tetraethyl thiuram disulfideMolecular Formula:C10H20N2S4Structural Formula:CAS NO:97-77-8Molecular Weight:296.5Specification: Item Crystal Oiled crystal Granule Appearance (visual inspection) light yellow crystal(Granule) Initial M.P. C= 66.0