基于地震动模拟的一致危险谱和条件均值谱生成及应用_朱瑞广.pdfVIP

32 Vol.32 Suppl 2015 6 June 2015 ENGINEERING MECHANICS 196 1000-4750(2015)Suppl-0196-06 ( 150090) AB95_BC Memphis TN 1000 50 2% P315.9 A doi: 10.6052/j.issn.1000-4750.2014.05.S016 GENERATION AND APPLICATION OF THE UNIFORM HAZARD SPECTRUM AND THE CONDITIONAL MEAN SPECTRUM BASED ON GROUND MOTION SIMULATION ZHU Rui-guang , YU Xiao-hui , LÜ Da-gang (Harbin Institute of Technology, Key Laboratory of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin, Heilongjiang 150090, China) Abstract: A method is proposed to generate the uniform hazard spectrum (UHS) and the conditional mean spectrum (CMS) based on ground motion simulation. This method adopts the hybrid source model including the AB95_BC point source model and the stochastic finite fault model to generate artificial ground motions. Then the response spectra of the artificial ground motions are used for statistics and the UHS and the CMS are developed for the concerned region. To illustrate the presented method, the region in terms of Memphis TN in US is selected as the concerned region, and the possible ground motions occurring in 1000 years are simulated. Then the UHS with the exceedance probability of 2% in 50 years and the corresponding CMS were generated. Finally, some ground motion records are selected based on the generated CMS in combination with the greedy optimization algorithm with the consideration of different scaling methods and different matching targets: the mean and the standard deviation. Key words: point source model; hybrid source model; uniform hazard s