工程岩体分级标准在深部巷道围岩分级中的应用及-煤田地质与勘探.PDF

第45 卷 第2 期 煤田地质与勘探 Vol. 45 No.2 2017 年4 月 COAL GEOLOGY EXPLORATION Apr. 2017 文章编号: 1001-1986(2017)02-0118-08 《工程岩体分级标准》在深部巷道围岩分级中的 应用及分析 朱训国 1,2 ，夏洪春 1,2 ，王忠昶 3 (1. 大连大学建筑工程学院，辽宁 大连 116622 ；2. 大连大学复杂结构系统灾害预测与控制辽宁省 重点实验室，辽宁 大连 116622 ；3. 大连交通大学交通学院，辽宁 大连 116600) : GB 5021894GB/T 502182014 GB/T 502182014 BQ BQ RcKv ：BQ ：TU45 ：A DOI: 10.3969/j.issn.1001-1986.2017.02.021 Application and analysis of standard of classification of engineering rocks in the classification of surrounding rock of deep roadway ZHU Xunguo1,2, XIA Hongchun1,2, WANG Zhongchang3 (1.College of Architectural Engineering, Dalian University , Dalian 116622, China; 2. Key Laboratory of Disaster Pre- diction and Control of Complex Structure System, Dalian University , Dalian 116622, China; 3. School of Transportation, Dalian Jiaotong University , Dalian 116600, China) Abstract: Through the comparison and analysis of the relevant contents of the new and old NS(National Standard) standards of engineering classification of rock masses(GB 50218—94, GB/T 50218—2014), the improvement of the new national standard was pointed out. Based on the national standard of engineering classification of rock masses (GB/T 502182014), the simplified calculation method of BQ has been put forward, and the relationship figure has been plotted between basic quality index of rock mass and rock integrity coefficient. The relationship table is established among BQ and R and K . Through the combination of the chart and the tab