延伸外摆线锥齿轮的成形原理及齿面结构研究.PDFVIP

第35 卷　第1 期 　　　西　安　交　通　大　学　学　报 　V ol .35 　№1 　2001 年1 月 　　　　 　　Jan.2001 JOURNA L OF X I ′A N JIAOT ONG UNIVERSIT Y :0253-987X (200 1)01-004 3-04 吴联银, 魏洪钦, 王小椿 ( , 7 10049, ) :用全新的观点诠释了延 外摆线锥齿轮的齿面成形原理, 并由此推导了刀刃在工件上的轨 迹曲面(族)的统 一表达形式.论述了在F ree-orm 型铣齿机上加工延 外摆线锥齿轮的实现方式. 分析了Free-orm 型铣齿机上用成形法加工延 外摆线锥齿轮时的齿面微分几何结构.通过刀刃 长度和刀盘转角实现了齿面参数化, 并获得了齿面上任意点的全部一至三阶微分几何参数. :延 外摆线锥齿轮;F ree-orm 型铣齿机;成形法 :TH 132 　:A Analysis of the Forming Principle and the Differential Structure of Extended Epicycloid Bevel Gear Tooth Surface Wu L iany in, Wei Hongqin, Wang Xiaochun (School o M echanical Engi neering, X i′an Jiaot ong U niversi ty, X i′an 7 10049, China) Abstract:A n ent irely new point o view is introduced to explain t he o rming principle o ex tended epicycloid bevel gears, w ith w hich a general ex pressio n o the trajectory sur ace o rmed by t he cutting edge on w ork-piece is deduced.T he realization method o orm at ting ex tended epicycloid gears on F ree-orm bevel gear milling machines is also presented.T he di erential st ructure o ex tended epicy - cloid bevel gear toot h sur ace is analy zed when ormat ted on ree-orm bevel gear milling machines. T he too th lanks are parameterized using t he lengt h o t he blade and the angle o rotation o t he cut ter, and all the geometric parameters o tooth sur aces rom t he irst to third order are obt ained. Key ords:extended ep icycloid bevel gear;f ree-f orm machine;f orming method 　　T CA , , 1 　 [1] .Free-orm r a , ＊ [2] . φr