LZ–型小型水稻联合收割机的设计-湖南农业大学学报欢迎您！.PDF

() 2015 8 41 4 Journal of Hunan Agricultural University (Natural Sciences), Aug. 2015, 41(4):435–439 DOI:10.13331/ki.jhau.2015.04.018 4LZ–0.8 型小型水稻联合收割机的设计 1,2,3 1,3 1,2,3* 1,3 1,3 4 (1. 410128 2. 410128 3. 410128 4. 417700)   摘 要4LZ–0.8 清 2 0.116 hm /h清 1.8% 0.2%2.0% GB/TDG/T 0142009 关 键 词4LZ–0.8 中图分类号S225.4 文献标志码：A 文章编号：1007− 1032(2015)04−0435−05 Design of 4LZ–0.8 type mini rice combined harvester Xie Fangping1,2,3Wang Xiushan1,3Ren Shuguang1,2,3*Liu Dawei1,3Li Xu1,3Chen Liyong4 (1.College of Engineering, Hunan Agricultural University, Changsha 410128, China; 2.Hunan Provincial Engineering Technology Research Center for Modern Agricultural Equipment, Changsha 410128, China; 3.Collaborative Innovation Center of Southern Chinese Grain and Oilseed, Changsha 410128 China; 4.Hunan Nongguang Agricultural Equipment Limited Company, Loudi, Hunan 417700, China ) Abstract: There are a lot of mountains and hills in the Southern China, and the fields are small with dispersed height. It makes the work environment unfit for a large-size combined harvester. In order to adapt to the bad working situation and improve the operation quality and efficiency of the mechanized harvesting in south of China, a 4LZ–0.8 type mini rice combined harvester was designed with small low loss rate and high clean efficiency. The parameter of key components, such as the walking device, the threshing and separating installation, the cleaning system and second cutter were analyzed and confirmed. A experiment has been done to test the performance. The results shows that the production rate was 0.116 hm2/h, the impurity rate was 1.8%,the broken rate was 0.2%, and the total lo