基于频响函数矩阵法的薄板结构阻尼系数识别.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2017, 6(2), 133-139 Published Online June 2017 in Hans. /journal/met /10.12677/met.2017.62019 Recognition of Structural Damping Coefficient of Thin Plate Based on the Frequency Response Matrix Method 1 2 3 4 4 4 Quanjun Zhu , Xiying Fan , Meigen Cao , Qingpeng Han , Jianxing Ren , Tiancheng Li 1 Global energy Interconnection Research Institute, Beijing 2 Research Institute of Economics and Technology, State Grid Shanxi Electric Power Company, Taiyuan Shanxi 3 China electric power research Institute, Beijing 4 College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai th th th Received: May 25 , 2017; accepted: Jun . 7 , 2017; published: Jun. 14 , 2017 Abstract The distribution of system damp could be described by the internal friction and structure damped coefficient. It was important for design of reducing vibration of the damping structure. The damp- ing coefficient of cantilever thin plate was identified by the frequency response function matrix method in this paper. The principle and test process were introduced. The test system was built to identify the damping coefficient. The thin plate was analyzed by the system. The data of the plate root were all bigger than that of freedom end no matter the damping matrix was inherent friction or the structural damping coefficient. The inner friction coefficient of low frequency band was bigger, while the structural damping coefficient of high frequency band was bigger. Keywords Frequency Response Function, Matrix Method,