单自由度体系地震残余变形研究和计算.docVIP

单自由度体系地震残余变形研究和计算.doc

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
单自由度体系地震残余变形研究和计算

单自由度体系地震残余变形研究和计算   摘要:地震残余变形是结构可修复能力的重要指标,准确分析结构的残余变形对于震后结构性能的评估与控制具有重要意义。基于对不同单自由度(SDOF)体系的弹塑性地震响应的统计分析,研究了不同参数对地震残余变形的影响,其中滞回特性、屈服后刚度、地面峰值加速度(PGA)以及最大弹塑性变形对残余变形的影响较大;同时结合理论分析提出了分别适用于弹塑性Kinematic滞回模型和Takeda滞回模型的残余变形简化计算方法。该方法是以先获得结构的最大弹塑性变形为基础的,能与传统的确定结构最大变形性能的抗震分析方法(Pushover方法)较好地结合。最后,以一钢筋混凝土单柱桥墩为例,详细阐述了所提出的方法进行单自由度体系结构的地震残余变形计算及震后结构性能评估的过程,分析表明基于Takeda模型的结构残余变形的计算结果偏于安全。 关键词:残余变形;最大弹塑性变形;滞回特性;屈服后刚度;地面峰值加速度 中图分类号:TU375.3 文献标志码:A 文章编号:1674-4764(2013)03-0032-10 Post-earthquake Residual Deformation Prediction of SDOF System Zhang Qin1, Zhu Jichao2, Gong Jinxin1 (1.Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, Liaoning, P. R. China; 2.School of Civil Safety Engineering, Dalian Jiaotong University, Dalian 116028, Liaoning, P. R. China) Abstract: Accurately predicting the residual displacement of reinforced concrete (RC) structures after an earthquake is of great significance in post-earthquake structural performance evaluation and control. To study the residual deformation of the structure, seismic time-history responses of single degree-of-freedom (SDOF) systems with different parameters were analyzed. Based on the analytical results, simplified models for estimating the likely residual deformations of structures characterized by Takeda and Kinematic hysteretic models were proposed respectively, and the residual deformation was found to be sensitive to hysteretic characteristics, stiffness ratio of structures, peak ground acceleration (PGA), as well as maximum elasto-plastic deformation. A case study for RC single-column bridge pier was provided to illustrate the process of residual deformation calculation and post-earthquake performance evaluation by using the proposed methods. Calculation results indicate that the residual deformation of the single-column pier characterized by the Takeda model often is much larger than that of columns characterized by the Kinematic model. Key words: residua

文档评论(0)

linsspace + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档