施工阶段钢底壳的模型试验研究-core.pdfVIP

73 　　　　　　 Vol. 7 No. 3 2005 6 Progress in Steel Building Structures 　Jun. 2005 - ——— 滕锦光,王汉 (, ) 　:　- (Comshell ) 。, , , 。 , , 。, 。 :　;;;; :TU 398, TU 33　　　　　:A　　　　　:1671 - 9379(2005)03- 0009- 07 Recent Research on Stee-l Concrete Composite Shell Roofs:Buckl ing Experiments on the Steel Base Shell during Const ruct ion TE N G J in-g uang , WON G H on-ting (Department of Civil and Structural ngineering,The Hong Kong Polytechnic University, Hongkong,China) Abstract:　Stee-l concrete composite shell roofs (Comshell roofs)are formed by pouring concrete on a thin stiffened steel base shell which serves as both the permanent formw ork and the tensile steel reinforcement. The thin steel base shell, constructed by bolting together open-topped modular units consisting of a base plate with surrounding edge plates, is a steel shell with thin stiffeners in both directions. The new system retains all the benefits of thin concrete shells, but eliminates the need for tem- porary formwork and minimises the required falsework. In this paper, the structural features and possible failure modes of this new structural system are first outlined. The results of a seriesof buckling experimentson model steel base shells under simulated wet concrete loading during construction are then presented. Keywords:　shell roofs;concrete shells;composite construction;modular construction;buckling ,、 1　 , 、。 ,。 , 、 ,, , 。Medwadow ski [1] , , “ 。, 、。 收稿日期:2003 - 12 - 01 作者简介: 滕锦光(1964 - ), 男, 博士、教授, 主要从事于FRP 在土木工程中的应用