HCS交换机配置步骤.docVIP

H3C S3100低端交换机配置步骤 1、给设备命名 H3Csystem [H3C]sysname （楼宇名称简写） 配IP地址及vlan描述 [H3C]interface Vlan-interface1 （VLAN 1作为下级单位的管理VLAN） [H3C-Vlan-interface1] ip address （各楼宇设备IP） IP地址掩码 [H3C-Vlan-interface1]description GL_VLAN 缺省网关 [H3C] ip rou 0.0.0.0 0 172.28.1.1 超级用户密码 [H3C]super password level 3 cipher H3C 配置telnet密码 [H3C]user-interface vty 0 4 [H3C-ui-vty0-4] authentication-mode password [H3C-ui-vty0-4] set authentication password cipher huawei [H3C-ui-vty0-4] user privilege level 1 WEB访问用户名和密码 [H3C]local-user admin [H3C-luser-admin] password cipher huawei [H3C-luser-admin] service-type telnet [H3C-luser-admin] level 3 网管配置 [H3C]snmp-agent community read public [H3C]snmp-agent community write H3C [H3C]snmp-agent sys-info version all [H3C]snmp-agent trap enable 链路捆绑及端口描述 [H3C] link-aggregation group 1 mode manual [H3C] interface GigabitEthernet3/0/1 [H3C-GigabitEthernet3/0/1] port link-type trunk [H3C-GigabitEthernet3/0/1] port trunk permit vlan 1000 [H3C-GigabitEthernet3/0/1] port link-aggregation group 1 [H3C-GigabitEthernet3/0/1] description TO_对端设备名_对端设备型号_对端接口 # [H3C] interface GigabitEthernet3/0/2 [H3C-GigabitEthernet3/0/2] port link-type trunk [H3C-GigabitEthernet3/0/2] port trunk permit vlan 1000 [H3C-GigabitEthernet3/0/2] port link-aggregation group 1 Trunk链路配置 [H3C] interface GigabitEthernet1/1/3 [H3C-GigabitEthernet1/1/3] port link-type trunk [H3C-GigabitEthernet1/1/3] port trunk permit vlan all S3100交换机堆叠 [H3C] stacking ip-pool IP地址前缀 堆叠交换机个数 IP地址掩码 [H3C] stacking enable OSPF简易配置过程 [H3C] ospf [H3C -ospf-1] area 区域编码 [H3C -ospf-1-area-0.0.0.1] network IP地址 IP地址反掩码 OSPF和RIP路由的双向引入 [H3C] ospf [H3C -ospf-1] import-route rip [H3C] rip [H3C -ospf-1] import-route ospf loopback-detection enable # interface Ethernet1/0/8 port a