基于PROE的鼠标产品结构设计及其建模毕业设计.doc

PAGE 毕业设计(论文)正文 题 目 基于PROE的鼠标产品结构设计与建模 专 业 机 械 设 计 制 造 及 自 动 化 基于PROE的鼠标产品结构设计与建模毕业设计 基于PROE的鼠标产品结构设计与建模 摘要：本文通过对鼠标发展现状、趋势的调查以及鼠标结构设计要求的分析，针对家庭用户的需求特点和人体工程学的研究成果，提出相应的鼠标外壳设计方案。然后运用PROE三维软件来进行鼠标的结构设计，设计中进行了鼠标的外观结构分析、色彩分析以及充分考虑了人机工程学，应用PROE软件的高级建模技术对鼠标进行三维建模、虚拟装配。这样在设计阶段就能直观、全面地反映设计意图，无需制造出昂贵的实物样品，即可分析产品结构、性能，及时发现设计问题，缩短设计开发周期。应用PROE对鼠标进行结构设计既减轻了工作量，又节省了资金,大大提高了产品的设计开发效率,符合现代技术的发展要求。 关键词：鼠标；ProE软件；三维建模；虚拟装配 Mouse product structure design and modeling based on Pro E Abstract：This article through to the mouse development present situation, the trend of the investigation and analysis of the design requirements of the mouse structure, for body engineering and the research results, put forward the corresponding mouse shell design scheme. Then use PROE 3 d software to the mouse structural design, design in the appearance of the mouse structure analysis and color analysis and the full consideration of the engineering, PROE application software of the senior modeling technology to the mouse on the 3 d modeling, virtual assembly. So in the designing phase intuitive, reflect design intention, need not make expensive real sample, product structure, performance can be analyzed, and the timely discovery design problems, shorten the design development cycle. PROE application to the mouse for structure design not only reduce the workload, and save money, greatly improving the product design development efficiency, comply with the requirements of the development of modern technology. Keywords: mouse, ProE software, 3d modeling, the virtual assembly. 目录 TOC \o 1-3 \h \z \u 1绪 论 PAGEREF _Toc325795777 \h 1 1.1 本课题研究的目的及意义 PAGEREF _Toc325795778 \h 1 1.2 鼠标技术的现状和发展趋势 PAGEREF _Toc325795779 \h 1 1.3主要技术指标 PAGEREF _Toc325795780 \h 2 1.4本章小结 PAGEREF _Toc325795781 \h 2 2鼠标的设计方案 PAGEREF _Toc325795782 \h 3 2.1 鼠标的类型 PAGEREF _Toc325795783 \h 3 2.2 鼠标设计的目标人群 PAGEREF _Toc325795784 \h 4 2.3 人因工程在鼠标设计中的应用 PAGEREF _Toc325795785 \h 4 2.4 鼠标的设计原则 PAGEREF _Toc325795786