GTS V300 英文版说明.pdfVIP

GTS V300 Release Notes GTS V300 Release Notes “Next Generation Solution in Geotechnical and Tunnel Engineering” “Next Generation Solution in Geotechnical and Tunnel Engineering” GTS V300 Release Notes GTS V300 Release Notes OVERVIEW OVERVIEW Documentation describes the modifications for midas GTS V300 R1 R2. I) Enhancements  Hoek-Brown Model  Modified Mohr-Coulomb  Cam Clay and Modified Cam Clay Models  Tabular Input for Material Properties  User Defined Phreatic Surfaces  Input Data ASCII File  Non-symmetric Multi-Frontal Direct Solver  File Exchange with midas Civil and midas Gen  Quadrilateral and Q-morph Mesher o Align Edge Seed Near Inner Loop o Mesh Clean-Up o Post Remesh II) Bug Fixes  Analysis  Pre/Post Processing PG License: Commercial Revision Date: July 20, 2009 GTS V300 Release Notes GTS V300 Release Notes Bug Fix: Enhancements Bug Fix: Enhancements Hoek-Brown Model In GTS V251, the return algorithm by Euler forward method uses an internal tolerance of 1.0 e-6. In GTS V300, instead of using the Euler forward method, a Cutting plane method has been implemented. This method is similar to the Euler Backward method, which uses an internal tolerance of 1.0e-3 and a routine that improves convergence by internal discretization of strength. In previous implementation, an Erroneous formula that was in the first order gradient equation has been corrected. Modified Mohr Coulomb a) In GTS V251, the Modified Mohr Coulomb (MMC) model has been updated such th