薄壁凸台套筒注塑模具方案及CAE分析（方案）.docVIP

薄壁凸台套筒注塑模具设计及CAE分析 摘要 本文主要介绍了薄壁凸台套筒注塑模具的设计过程，以Pro/E、CADmoldflow对模具浇注系统、冷却系统及流动系统进行了模拟分析，基本完成了模具的整个设计过程。 关键词：薄壁、注塑、模具、moldflow Abstract This paper applies the design precedure of the injection mold of thin-walled convex sleeves. Based on Pro/e and CAD, detailed design of the structure of the injection mold is carried out. The assembly drawing and some part drawings of the main parts are completed. During the process of the design, the structure of the plastic part and the feasibility of forming technolohy are analysed, with the basic operation principle of the mould introduced, and detailed cal