采用三维光学测量技术对薄板焊接失稳变形的分析.PDFVIP

See discussions, stats, and author profiles for this publication at: /publication/275352210 Analysis of buckling distortion caused by welding using 3D optical measurement technology Article in Han ie Xuebao/Transactions of the China Welding Institution · June 2013 CITATIONS READS 0 12 4 authors, including: Jiangchao Wang Huazhong University of Science and Technology 26 PUBLICATIONS 172 CITATIONS SEE PROFILE Some of the authors of this publication are also working on these related projects: Mechanism Investigation on Mitigation of Welding Induced Buckling in Thin Plates Structure by Medium Frequency Induction Heating View pro ect Development of Intelligent Platform for Welding Distortion Prediction during Ship Structure Fabrication View pro ect All content following this page was uploaded by Jiangchao Wang on 05 December 2016. The user has requested enhancement of the downloaded file. 3 4 6 Vol． 3 4 No． 6 第 卷 第 期 焊 接 学 报 2 0 1 3 6 June 2 0 1 3 年 月 TＲANSACTIONS OF THE CHINA WELDING INSTITUTION 采用三维光学测量技术对薄板焊接失稳变形的分析 1 1 2 1 孙向伟 ， 殷咸青 ， 王江超 ， 张建勋 (1． ， 7 10049 ; 西安交通大学金属材料强度国家重点实验室 西安 2 ． ， 5670047) 日本大阪大学接合科学研究所 大阪 : ——— 摘 要 采用一种新的测试方法 三维光学面扫描测量系统对低碳钢板平板堆焊过 ， ， 程中的失稳变形进行了研究 通过对低碳钢薄板焊前和焊后状态进行测量 得到薄板焊 ; ， 前和焊后的全场面外变形形貌 并结合基于固